Communicate with Supplier? Supplier
Dartin Xin Mr. Dartin Xin
What can I do for you?
Chat Now Contact Supplier
Storm Circuit Technology Ltd

Capacitive Touch Pad Design - manufacturer, factory, supplier from China

(Total 24 Products for Capacitive Touch Pad Design)

  • 6 layer Via in Pad PCB

    6 layer Via in Pad PCB

    • Model No.: Storm-0477

    • Transportation: Ocean,Air

    6 layers PCB is widely used in compact electronics such as wearable devices communication modules and military equipments There are high restrict engineering requirements of manufacturing particularly in process of plating laminating and drilling Storm Circuit are very experienced in 6 layers PCB fabrication during...

    Contact Now

  • 4 layer via in pad PCB

    4 layer via in pad PCB

    • Model No.: Storm-0473

    • Transportation: Ocean,Land,Air

    Storm Circuit is mainly subordinate to the production of high precision PCB We often make boards with very small trace width and trace spacing Below PCB is we just made for 3 5mil trace PCB This order is 4 layer PCB The solder is blue and finishing is ENIG PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4...

    Contact Now

  • 4 layer Via in pad BGA PCB

    4 layer Via in pad BGA PCB

    • Model No.: Storm-0466

    • Transportation: Ocean,Land,Air

    Storm Circuit supply 1 30 layers rigid PCB Printed Circuit Boards 1 4 flexible PCB FPC 1 10 layers rigid flex PCB and PCB Assembly Components sourcing cables SMT stencils We focus on top quality quick turn and turnkey service without any MOQ 1 pcs is welcome for us to do PCB features 1 Layer 4 2 Material FR4 3...

    Contact Now

  • 4 layer via in pad PCB board

    4 layer via in pad PCB board

    • Model No.: Storm-0456

    • Transportation: Ocean,Land,Air

    Via in pad in the disk is mainly used in the packaging area of BGA because when the surface needs to be welded or chip pasted the requirements for its accuracy and acceptable area are high and the requirements for the surface flatness are high so as to prevent the chip from being uneven when it is pasted resulting in...

    Contact Now

  • 4 layer HDI with Muti-design PCB

    4 layer HDI with Muti-design PCB

    • Model No.: Storm-0412

    • Transportation: Ocean,Land,Air

    Unlike other PCB suppliers we accept your PCB order with multiple designs in one panel Many customers told us they would like to cut cost when they are doing design jobs as the first prototypes may change in next version Only 1 or 2 units they need for each design So our StormProto helps it includes Up to 10 designs...

    Contact Now

  • 4 layer PCB with via in pad

    4 layer PCB with via in pad

    • Model No.: Storn-0278

    • Transportation: Ocean,Land,Air

    The four layer board is laminated on the basis of the double sided board two layer board During the pressing PP and copper foil are added to the two sides of the double sided board and then pressed into a multilayer board after high temperature and high pressure In simple terms the four layer board has an inner layer...

    Contact Now

  • 4 layer FR  microwave PCB  design

    4 layer FR microwave PCB design

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0384

    • Transportation: Ocean,Land,Air

    As technology advances new designs and products are entering the market every day These advances have brought about major changes in electronics For product developers it is very interesting to find the right PCB for his product to ensure smooth work and long life Finding the perfect RF microwave PCB can be stressful...

    Contact Now

  • 4 layer RF PCB antenna design

    4 layer RF PCB antenna design

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0383

    • Transportation: Ocean,Land,Air

    RF microwave PCBs are used in a variety of wireless technology based products If you are developing robots smartphones security applications or sensors you need to choose the perfect RF microwave PCB for your product PCB features 1 Layer 4 2 Material Rogers 3 Thickness 32mil 4 Copper 1OZ 5 Mini hole 0 2mm 7 Mini width...

    Contact Now

  • 4 layer BGA  via in pad PCB

    4 layer BGA via in pad PCB

    • Model No.: Storm-0380

    • Transportation: Ocean,Land,Air

    Via in pad is an important component of the multilayer PCB It not only bears the performance of the main functions of the PCB but also the cost of drilling usually accounts for 30 to 40 of the cost of the PCB In short every hole on a PCB can be called via in pad PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm...

    Contact Now

  • 4 layer ELIC  via in pad PCB

    4 layer ELIC via in pad PCB

    • Model No.: Storm-0381

    • Transportation: Ocean,Land,Air

    Via in big pads are not a big problem but for BGA that is technology As BGA pads are very small 10mil or 12mil and there is no enough space Manufacturing is not easy as other boards PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 0mm 4 Copper 1OZ 5 Mini hole 0 1mm 7 Mini width space 0 08mm 0 08mm 8 Finish...

    Contact Now

  • 8 layer HDI via in pad PCB

    8 layer HDI via in pad PCB

    • Model No.: Storm-0378

    • Transportation: Ocean,Land,Air

    How PCB manufacturers like us to do via in pad board We will fill all vias with non conductive epoxy and plate copper over it so the vias are flat same as others Many PCB factories are unable to do such capability The key technology is how we fill vias and guarantee there is no any solder surface finishing in the...

    Contact Now

  • 8 layer via in pad PCB

    8 layer via in pad PCB

    • Model No.: Storm-0377

    • Transportation: Ocean,Land,Air

    What is Via in Pad In shortly via in pad is the via holes are at the SMD pad The vias are very small usually under 0 3mm Why and how First is there is no enough space to layout you have to put the vias and holes closer even together Second it helps thermal management and for high frequency boards it may help improve...

    Contact Now

  • metal core pcb design board

    metal core pcb design board

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0356

    • Transportation: Ocean,Land,Air

    Obviously the size of aluminum core PCB is much more stable than that of insulating PCB boards The aluminum core MC PCB and aluminum sandwich board are heated from 30 C to 140 150 C and the size change is 2 5 3 0 PCB features 1 Layer 2 2 Material Aluminum 3 Thickness 0 8mm 4 Copper 1oz 5 Mini hole 0 15mm 6 Mini width...

    Contact Now

  • 4 layer  rigid flex pcb design

    4 layer rigid flex pcb design

    • Model No.: Storm-0334

    • Transportation: Air

    Rigid flex PCB can reduce signal transmission distance and increased speed can effectively improve reliability The traditional signal transmission through the connector is PCB board connector flex PCB board connector PCB board while the signal transmission of the rigid flex PCB board is reduced to circuit board flex...

    Contact Now

  • metal core pcb design

    metal core pcb design

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0348

    • Transportation: Ocean,Land,Air

    The aluminum PCB is a metal based copper clad board with good heat dissipation function Generally one layer MC PCB composed of a three layer structure which is a circuit layer copper foil an insulation layer and a metal base layer For high end use it is also designed as a double side PCB with a structure of circuit...

    Contact Now

  • HDI  pcb design guidelines

    HDI pcb design guidelines

    • Model No.: Storm-0341

    • Transportation: Ocean,Land,Air

    HDI PCB board is mainly produced by using micro blind buried hole technology The feature is that the density of electronic circuits in printed circuit boards can be higher and the increase in circuit density also makes printed circuit boards made of HDI boards unusable Generally HDI must adopt a non mechanical...

    Contact Now

  • blind and buried vias design

    blind and buried vias design

    • Model No.: Storm-0343

    • Transportation: Ocean,Land,Air

    HDI PCB board is generally manufactured by the lamination method The more the lamination times the higher the technical grade of the board Ordinary HDI PCB boards are basically laminated one time High level HDI uses two or more lamination technologies At the same time advanced PCB technologies such as stacked holes...

    Contact Now

  • rigid flex pcb design

    rigid flex pcb design

    • Model No.: Storm-0337

    • Transportation: Air

    There are many production processes for the rigid flex board the production is difficult the yield is low and the input materials and manpower are more Therefore its price is more expensive and the production time is more longer than rigid PCB or flex PCB PCB features 1 Layer 4 layer rigid 4 layer flex 2 Material FR4...

    Contact Now

  • rigid-flex pcb design pdf

    rigid-flex pcb design pdf

    • Model No.: Storm-0336

    • Transportation: Air

    The use of rigid flex boards can reduce the number of man hours for SMT because the number of connectors is reduced It also reduces the man hours for assembly of the whole machine because the assembling action of inserting the flex PCB board into the connector is omitted or the manufacturing process of Hot Bar is...

    Contact Now

  • rigid-flex pcb design altium

    rigid-flex pcb design altium

    • Model No.: Storm-0333

    • Transportation: Air

    Rigid flex PCB Can effectively save space on the circuit board and eliminate the process of using connectors or Hot Bar Because the rigid flex boards have been combined the space that originally required the use of connectors or the Hot Bar process can be saved For some boards with high density requirements the lack...

    Contact Now

  • flex rigid pcb design altium

    flex rigid pcb design altium

    • Model No.: Storm-0327

    • Transportation: Ocean,Land,Air

    At present the common space extension scheme of CB rigid circuit boards is to use slots and interface cards FPC flexible circuit boards can be made similar structures as long as they are designed for conversion and they are more flexible in directional design PCB features 1 Layer 4 2 Material PI 3 Thickness 0 12mm 4...

    Contact Now

  • flex pcb antenna design

    flex pcb antenna design

    • Model No.: Storm-0325

    • Transportation: Ocean,Land,Air

    FPC double sided flexible PCB board structure There are pads on both sides of the double sided PCB board which is mainly used for connection with other PCB circuit boards PCB features 1 Layer 2 2 Material PI 3 Thickness 0 2mm 4 Copper 1OZ 5 Mini hole 0 1mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our...

    Contact Now

  • flex pcb design guide

    flex pcb design guide

    • Model No.: storm-0321

    • Transportation: Ocean,Land,Air

    FPC PCB board is a flexible circuit board with the simplest Stack up which is mainly used for connection with other PCBs We can offer the quick turn flex PCB prototype with 3 days to fabricate Please free contact us if you have any flex PCB board job to make PCB features 1 Layer 2 2 Material PI 3 Thickness 0 1mm 4...

    Contact Now

  • 2 layer rigid-flex pcb  design

    2 layer rigid-flex pcb design

    • Model No.: Storm-0306

    • Transportation: Air

    The rigid flex board has both the characteristics of FPC and the characteristics of PCB Therefore it can be used in some products with special requirements both a certain flexible area and a certain rigid area which can save product internal space and reduce the volume of the finished product So it can greatly help...

    Contact Now

Review

Irwin Rose

Jun 24, 2020 5

Nice product, the Capacitive Touch Pad Design is very responsible.
Rossanna Aldrich

Jun 12, 2020 5

I did not expect the product to be as good as it is, but it definitely surpassed my expectations. Top service level from Storm Circuit Technology Ltd and responded to all my questions within 24 hours. Highly recommended.
Trudy Jones

Jun 11, 2020 5

Very good seller, very conscientious Capacitive Touch Pad Design , delivery within 15 days, really very good.
  • Related Information
With this motto in mind, we've got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Capacitive Touch Pad Design , capacitive touch pad design , capacitive touch keypad design , We sincerely welcome buddies to negotiate business enterprise and start cooperation with us. We hope to join hands with good friends in different industries to produce a brilliant long term.
"Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Capacitive Touch Pad Design , capacitive touch pad design , capacitive touch keypad design , We can give our clients absolute advantages in product quality and cost control and we have full range of molds from up to one hundred of factories. As product updating fast we succeed in developing many high quality products for our clients and get high reputation.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home

Phone

Skype

Inquiry