Communicate with Supplier? Supplier
Dartin Xin Mr. Dartin Xin
What can I do for you?
Chat Now Contact Supplier
Storm Circuit Technology Ltd

Electronic Parts Harrisburg Pa - manufacturer, factory, supplier from China

(Total 24 Products for Electronic Parts Harrisburg Pa)

  • 4 layer via in pad PCB board

    4 layer via in pad PCB board

    • Model No.: Storm-0456

    • Transportation: Ocean,Land,Air

    Via in pad in the disk is mainly used in the packaging area of BGA because when the surface needs to be welded or chip pasted the requirements for its accuracy and acceptable area are high and the requirements for the surface flatness are high so as to prevent the chip from being uneven when it is pasted resulting in...

    Contact Now

  • 4 layer PCB with via in pad

    4 layer PCB with via in pad

    • Model No.: Storn-0278

    • Transportation: Ocean,Land,Air

    The four layer board is laminated on the basis of the double sided board two layer board During the pressing PP and copper foil are added to the two sides of the double sided board and then pressed into a multilayer board after high temperature and high pressure In simple terms the four layer board has an inner layer...

    Contact Now

  • 4 layer BGA  via in pad PCB

    4 layer BGA via in pad PCB

    • Model No.: Storm-0380

    • Transportation: Ocean,Land,Air

    Via in pad is an important component of the multilayer PCB It not only bears the performance of the main functions of the PCB but also the cost of drilling usually accounts for 30 to 40 of the cost of the PCB In short every hole on a PCB can be called via in pad PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm...

    Contact Now

  • 4 layer ELIC  via in pad PCB

    4 layer ELIC via in pad PCB

    • Model No.: Storm-0381

    • Transportation: Ocean,Land,Air

    Via in big pads are not a big problem but for BGA that is technology As BGA pads are very small 10mil or 12mil and there is no enough space Manufacturing is not easy as other boards PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 0mm 4 Copper 1OZ 5 Mini hole 0 1mm 7 Mini width space 0 08mm 0 08mm 8 Finish...

    Contact Now

  • 8 layer HDI via in pad PCB

    8 layer HDI via in pad PCB

    • Model No.: Storm-0378

    • Transportation: Ocean,Land,Air

    How PCB manufacturers like us to do via in pad board We will fill all vias with non conductive epoxy and plate copper over it so the vias are flat same as others Many PCB factories are unable to do such capability The key technology is how we fill vias and guarantee there is no any solder surface finishing in the...

    Contact Now

  • 8 layer via in pad PCB

    8 layer via in pad PCB

    • Model No.: Storm-0377

    • Transportation: Ocean,Land,Air

    What is Via in Pad In shortly via in pad is the via holes are at the SMD pad The vias are very small usually under 0 3mm Why and how First is there is no enough space to layout you have to put the vias and holes closer even together Second it helps thermal management and for high frequency boards it may help improve...

    Contact Now

  • flex pcb current carrying capacity

    flex pcb current carrying capacity

    • Model No.: Storm-0332

    • Transportation: Ocean,Land,Air

    FPC flexible PCB circuit board is not only a circuit board that can be flexed but also an important design method for connecting circuit structures This structure can be used with other electronic product designs to build a variety of different applications PCB features 1 Layer 2 2 Material PI 3 Thickness 0 15mm 4...

    Contact Now

  • 4 layer rigid flex pcb cost comparison

    4 layer rigid flex pcb cost comparison

    • Model No.: Storm-0307

    • Transportation: Air

    There are many production processes for the rigid flex board the production is difficult the yield is low and the input materials and manpower are more Therefore its price is more expensive and the production time is more longer than rigid PCB or flex PCB PCB features 1 Layer 4 layer rigid 4 layer flex 2 Material FR4...

    Contact Now

  • 4 layer Via in Pad PCB

    4 layer Via in Pad PCB

    • Model No.: Storm-0250

    • Transportation: Ocean,Land,Air

    Storm Circuit Can fabricate Gold fingers PCB also via in Pad HDI PCB PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 8mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR...

    Contact Now

  • 4 layer  via in pad PCB

    4 layer via in pad PCB

    • Model No.: Storm-0113

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 15mm 0 15mm 8 Finish Immersion Gold 9 Blind Holes G2 G3 Our manufacturing capability Manufacture capability layers 1 32

    Contact Now

  • 4 layer Blue Solder via in pad PCB

    4 layer Blue Solder via in pad PCB

    • Model No.: Storm-0249

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 2 layer via in pad PCB

    2 layer via in pad PCB

    • Model No.: Storm-0273

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 2 2 Material FR4 3 Thickness 0 8mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 2 layer black solder via in pad PCB

    2 layer black solder via in pad PCB

    • Model No.: Storm-0237

    • Transportation: Ocean,Land,Air

    1 Layer 2 2 Material FR4 3 Thickness 1 0mm 4 Copper 1OZ 5 Mini hole 0 3mm 7 Mini width space 0 25mm 0 25mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm Material...

    Contact Now

  • 2 layer Green Solder Via in pad PCB

    2 layer Green Solder Via in pad PCB

    • Model No.: Storm-0215

    • Transportation: Ocean,Land,Air

    Storm Circuit is a professional PCB and PCBA manufacturer in China we focus on high mix low to medium volume PCB fabrication and PCB assembly service for many years We can fabricate via in Pad PCB impedance control PCB HDI PCB PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 25mm 7...

    Contact Now

  • 8 layer 2.5mil track and space HDI PCB

    8 layer 2.5mil track and space HDI PCB

    • Model No.: Storm-0210

    • Transportation: Ocean,Land,Air

    Storm Circuit is a professional PCB and PCBA manufacturer in China we focus on high mix low to medium volume PCB fabrication and PCB assembly service for many years We can offer 8 layer HDI PCB 8 layer 3mil trace PCB 8 layer impedance contril PCB also PCB features 1 Layer 8 2 Material FR4 TG170 3 Thickness 1 6mm 4...

    Contact Now

  • 4 layer blue solder BGA via in pad

    4 layer blue solder BGA via in pad

    • Model No.: Storm-0179

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 25mm 7 Mini width space 0 15mm 0 15mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510...

    Contact Now

  • 4 layer HDI Via in pad PCB

    4 layer HDI Via in pad PCB

    • Model No.: Storm-0146

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 3mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold 9 HDI L1 L2 Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size...

    Contact Now

  • 8 layer TG170 via in pad PCB

    8 layer TG170 via in pad PCB

    • Model No.: Storm-0141

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 8 2 Material FR4 3 Thickness 1 6mm 4 Copper 2OZ 5 Mini hole 0 3mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 4 layer ENIG  KeyPad PCB

    4 layer ENIG KeyPad PCB

    • Model No.: Storm-0044

    • Transportation: Ocean,Land,Air

    Global clients are satisfied with our Reliable Quality Competitive Prices On time delivery and Good Service With Wellcore you enjoy efficiency effectiveness and reassuring journey How quickly we can do for PCB We can offer quick Turn 4 layer ENIG PCB The fastest is 3 WD For the special PCB For example MC PCB Flex PCB...

    Contact Now

  • 4 layer 1.0mm VIa in Pad PCB

    4 layer 1.0mm VIa in Pad PCB

    • Model No.: Storm-0103

    • Transportation: Ocean,Land,Air

    There are numerous benefits of via in pad PCB It helps to increase density lessen inductance and use finer pitch packages In via in pad process a via is directly placed below the device s contact pads This enables greater part density and superior routing Therefore via in pad furnishes the considerable board space...

    Contact Now

  • PCBA for High quality  electronic controller

    PCBA for High quality electronic controller

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0096

    • Transportation: Ocean,Land,Air

    We assembly many Electronic Controller board to our clients High qualiy and Excellent service win many repeat orders Storm Circuit offers PCB assembly from prototypes to mass quantity production SMT stencil and cable assemblies services can be provided together PCB Assembly and PCB PCBA design are our main business We...

    Contact Now

  • 2 layer Transparent Soldermask   PCB

    2 layer Transparent Soldermask PCB

    • Model No.: Storm-0032

    • Transportation: Ocean,Land,Air

    Do you need Transparent board We fabricate many GTransparent Soldermask PCBs via our quick turn service It is very cool for Transparent Soldermask PCB Pls free to contact us if you have any need 2 lauer Transparent Soldermask PCB Established in 2008 we have more than 10 years experience in PCB manufacturing and PCB...

    Contact Now

  • 2 different designs PCB in one Panels

    2 different designs PCB in one Panels

    • Model No.: Storm-0061

    • Transportation: Air

    For now Most of clients want to save the PCB Cost Storm Circuit can help you save you cost We can put your different designs in one set So this way will save your tooling and the total Cost Storm Circuit is an PCB PCBA manufacturer for global partener nearly 10 years High quality reasonable price on time delivery good...

    Contact Now

  • PCBA for different design in one panel

    PCBA for different design in one panel

    • Model No.: Storm-0097

    • Transportation: Ocean,Land,Air

    How to save your assembly cost with high quality We can put different designs in one set This will save your PCBA cost and PCB cost Our company is not only trying to give customers a good product but also pay attention to offering a complete and safe package And here we prepare some personalized services for all the...

    Contact Now

Review

Mr.govoni Jhon Nelson

May 24, 2020 5

Willing to do business with Storm Circuit Technology Ltd company again, thanks!
Matheus Porto

May 23, 2020 4

This has been a fun Electronic Parts Harrisburg Pa supplier has the best helpline I have ever seen and can answer literally any question. I searched for years for something like this. Its a really great product.
Phu Nhin Ho

May 16, 2020 5

The best Electronic Parts Harrisburg Pa supplier to work with, High-quality product much better than I bought from other company! Thank you!
  • Related Information

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home

Phone

Skype

Inquiry