Communicate with Supplier? Supplier
Dartin Xin Mr. Dartin Xin
What can I do for you?
Chat Now Contact Supplier
Storm Circuit Technology Ltd

Enepig Finish - manufacturer, factory, supplier from China

(Total 24 Products for Enepig Finish)

  • 4 layer 0.8mm ENEPIG PCB

    4 layer 0.8mm ENEPIG PCB

    • Model No.: Storm-0199

    • Transportation: Ocean,Air

    Storm Circuit is a professional PCB and PCBA manufacturer in China we focus on high mix low to medium volume PCB fabrication and PCB assembly service for many years We can offer full turnkey service job including PCB Components Program Testing We purchase components from Digikey Mouser RS and so on So pls don t doubt...

    Contact Now

  • 4 layer Green Solder ENEPIG surface finishing

    4 layer Green Solder ENEPIG surface finishing

    • Model No.: Storm-0279

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 4 layer Rigid-flex  PCB with ENEPIG

    4 layer Rigid-flex PCB with ENEPIG

    • Model No.: Storm-0363

    • Transportation: Ocean,Land,Air

    What is ENEPIG ENEPIG Electroless Nickel Electroless Palladium Immersion Gold is a surface finish for Printed Circuit Boards ENEPIG works well with lead free and conventional eutectic solder alloys This is the best way for gold wire bonding Advantages for ENEPIG PCB features 1 Layer 4 2 Material FR4 Polyimide 3...

    Contact Now

  • ENEPIG PCB with high frequency

    ENEPIG PCB with high frequency

    • Model No.: Storm-0364

    • Transportation: Ocean,Land,Air

    The ENEPIG finish process does not need to connect the wire bar and has good uniformity in the process of wiring the chemical nickel layer is the main base so the tensile test of the hardness of the nickel layer to the support and bonding strength of the wire will It is influential and the nickel layer in the chemical...

    Contact Now

  • ENEPIG PCB and Rogers material

    ENEPIG PCB and Rogers material

    • Model No.: Storm-0365

    • Transportation: Ocean,Land,Air

    Chemical nickel palladium ENEPIG is one of the common surface treatment processes for PCBs but in recent years the ENEPIG process has been applied to gold fingers in wire bonding optical module product We make many 4 layer ENEPIG PCBs with competitive price PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 2mm 4...

    Contact Now

  • ENEPIG finishing plating  thickness

    ENEPIG finishing plating thickness

    • Model No.: Storm-0371

    • Transportation: Ocean,Land,Air

    Metal palladium is a platinum based element with stable chemical properties and acid and oxidation resistance At the same time the hardness of metal palladium is greater than that of hard gold PCB including cobalt and it has better resistance to plugging and unplugging The chemical nickel palladium gold process...

    Contact Now

  • Ipc-4556 specification for ENEPIG

    Ipc-4556 specification for ENEPIG

    • Model No.: Storm-0367

    • Transportation: Ocean,Land,Air

    Small form pluggable boards SFP boards for short in the industry are mainly used for optical modules converting electrical signals into optical signals in communication equipment The following features 1 Gold fingers PCB are long or short gold fingers or segmented gold fingers 2 Gold fingers need to be plated with...

    Contact Now

  • Wire bonding PCB need ENgineering finishing

    Wire bonding PCB need ENgineering finishing

    • Model No.: Storm-0369

    • Transportation: Ocean,Land,Air

    Taking into account the plug in resistance of nickel palladium and palladium and the requirements of high speed optical module products the SFF 8436 Specification for QSFP 10 Gbs 4X PLUGGABLE TRANSCEIVER standard formulated by the SFF Committee 2 specifies nickel palladium Surface treatment as a requirement for gold...

    Contact Now

  • IPC standard for ENEPIG

    IPC standard for ENEPIG

    • Model No.: Storm-0370

    • Transportation: Ocean,Land,Air

    Use the plug connector to plug and unplug the thick palladium thin gold and electroplated hard gold fingers and manually insert and remove 500 times Observe the appearance of golden fingers with a stereo microscope After the plug test there is a silver gray trace on the gold surface of the thick palladium thin gold...

    Contact Now

  • 2 layer PCB with 2 days to finish

    2 layer PCB with 2 days to finish

    • Model No.: Storm-0444

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 3mm 7 Mini width space 0 25mm 0 25mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • Edge plating ENEPIG pcb process

    Edge plating ENEPIG pcb process

    • Model No.: Storm-0373

    • Transportation: Ocean,Land,Air

    A 48 hour salt spray test was performed on the gold finger after 500 times of plug test to evaluate the corrosion resistance of the gold finger of the two processes Test conditions salt solution composition 50g L NaCl solution test temperature 35 pressure barrel temperature 47 pH value 6 5 7 2 25 placement angle the...

    Contact Now

  • ENEPIG pcb surface finish for wire bonding

    ENEPIG pcb surface finish for wire bonding

    • Model No.: Storm-0376

    • Transportation: Ocean,Land,Air

    ENEPIG gold finger has good resistance to plugging corrosion and aging and its performance is similar to that of electroplated hard gold ENEPIG gold finger has good resistance to plugging corrosion and aging Similar in hard gold PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 2mm 4 Copper 1OZ 5 Mini hole 0 15mm 7...

    Contact Now

  • PCB hard gold and ENEPIG PCB

    PCB hard gold and ENEPIG PCB

    • Model No.: Storm-0375

    • Transportation: Ocean,Land,Air

    ENEPIG thick palladium thin gold has good solderability full tin and IMC is uniform and continuous ENEPIG thick palladium thin gold has good solderability full tin and IMC is even and continuous PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 1mm 0 1mm 8...

    Contact Now

  • ENEPIG solder joint reliability

    ENEPIG solder joint reliability

    • Model No.: Storm-0374

    • Transportation: Ocean,Land,Air

    When NEPIG gold finger technology is applied to bonding products the production process is simple the gold finger is four bread gold and the bonding pad spacing is strong the cost is lower than the traditional electroplated hard gold finger technology PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper...

    Contact Now

  • electroless copper ENEPIG  plating pcb

    electroless copper ENEPIG plating pcb

    • Model No.: Storm-0372

    • Transportation: Ocean,Land,Air

    After the plug test there is a light silver gray trace on the gold surface of the electroplated hard gold finger The elemental analysis results are Au Ni where the atomic percentage of Au is 94 99 The gray scratched surface is Au The contact resistances before and after the plug in test are 6 26 and 5 59 m and the...

    Contact Now

  • 2 layer ENEPIG PCB with green  solder

    2 layer ENEPIG PCB with green solder

    • Model No.: Storm-0368

    • Transportation: Ocean,Land,Air

    Thick palladium and thin gold The thickness of the coatings of ENEPIG gold fingers and electrical hard gold fingers are measured by the X ray coating thickness gauge as shown in Table 1 Au 0 061 m Pd 0 347 m hard gold process Au 0 388 m PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0...

    Contact Now

  • 2 layer ENEPIG PCB with red solder mask

    2 layer ENEPIG PCB with red solder mask

    • Model No.: Storm-0366

    • Transportation: Ocean,Land,Air

    Chemical nickel palladium gold ENEPIG is a common type of surface treatment Unlike traditional chemical nickel gold surface treatment processes a layer of palladium is introduced between the nickel layer and the gold layer which can effectively prevent the migration of nickel to the gold layer Therefore it has good...

    Contact Now

  • express RO4350B ENEPIG PCB

    express RO4350B ENEPIG PCB

    • Model No.: Storm-0191

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 3 2 Material Rogers 3 Thickness 0 8mm 4 Copper 1OZ 5 Mini hole 0 25mm 7 Mini width space 0 15mm 0 15mm 8 Finish ENEPIG Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 4 layer 1.6mm ENEPIG  PCB

    4 layer 1.6mm ENEPIG PCB

    • Model No.: Storm-0294

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 2OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish ENEPIG Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm Material...

    Contact Now

  • 2 layer  0.8mm 1OZ ENIG surface finish

    2 layer 0.8mm 1OZ ENIG surface finish

    • Model No.: STORM-0272

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 2 2 Material FR4 3 Thickness 0 8mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 4 layer PCB finish them for 3 days

    4 layer PCB finish them for 3 days

    • Model No.: Storm-0248

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 2mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • Multilayer PCB, Blue Solder Mask, ENIG finishing

    Multilayer PCB, Blue Solder Mask, ENIG finishing

    • Model No.: Storm-0239

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 2mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Teflon Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 2 layer 0.2mm  ENEPIG PCB

    2 layer 0.2mm ENEPIG PCB

    • Model No.: Storm-0211

    • Transportation: Ocean,Land,Air

    Storm Circuit is a professional PCB and PCBA manufacturer in China we focus on high mix low to medium volume PCB fabrication and PCB assembly service for many years We can offer 0 2mm ENEPIG Rigid PCB 2 layer ENEPIG PCB 4 layer ENEPIG PCB 4mil trace and space PCB PCB features 1 Layer 2 2 Material FR4 3 Thickness 0 2mm...

    Contact Now

  • 4 layer RO4350B ENEPIG PCB

    4 layer RO4350B ENEPIG PCB

    • Model No.: Storm-0203

    • Transportation: Ocean,Land,Air

    Storm Circuit is a professional PCB and PCBA manufacturer in China we focus on high mix low to medium volume PCB fabrication and PCB assembly service for many years We can offer full turnkey service job including PCB Components Program Testing We purchase components from Digikey Mouser RS and so on So pls don t doubt...

    Contact Now

Review

Umar Munir

Jun 27, 2020 5

This supplier offers high quality but low price Enepig Finish , it is really a nice manufacturer and business partner.
Mr.md. Salahuddin

Jun 19, 2020 5

The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
Daniel Alvarado

Jun 14, 2020 5

Enepig Finish and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
  • Related Information
We insist on offering high-quality production with great enterprise concept, honest product sales and also the finest and fast service. it will bring you not only the superior quality solution and huge profit, but the most significant should be to occupy the endless market for Enepig Finish , enepig finish , gold enig finish , We've got substantial goods offer and also the price is our advantage. Welcome to inquire about our items.
"It adheres for the tenet ""Honest, industrious, enterprising, innovative"" to create new products consistently. It regards buyers, success as its own success. Let us develop prosperous future hand in hand for Enepig Finish , enepig finish , gold enig finish , Custom orders are acceptable with different quality grade and customer's especial design. We've been looking forward to establish the good and successful cooperation in business with long terms from the customers of all over the world.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home

Phone

Skype

Inquiry