Communicate with Supplier? Supplier
Dartin Xin Mr. Dartin Xin
What can I do for you?
Chat Now Contact Supplier
Storm Circuit Technology Ltd

Green Peel Before And After - manufacturer, factory, supplier from China

(Total 24 Products for Green Peel Before And After)

  • 4 layer TG170 green solder PCB

    4 layer TG170 green solder PCB

    • Model No.: Storm-0461

    • Transportation: Ocean,Land,Air

    The application of heavy copper board in PCB prototypes almost everywhere and its application field is very broad including all kinds of home appliances high tech products military medical and other electronic equipment Heavy copper board has excellent extension performance high temperature low temperature corrosion...

    Contact Now

  • 4 layer Blind and burried via  PCBs

    4 layer Blind and burried via PCBs

    • Model No.: Storm-0001

    HDI PCB uses advanced laminate materials that are thinner than those used in traditional printed circuit boards Since HDI PCB requires higher accuracy and manufacturing accuracy and overall performance special materials that meet specific specifications are required Storm Circuit offers multiple material options for a...

    Contact Now

  • 6 layer PCB with 3.5mil trace and pitch

    6 layer PCB with 3.5mil trace and pitch

    • Model No.: Storm-0442

    • Transportation: Ocean,Air

    6 layers PCB is widely used in compact electronics such as wearable devices communication modules and military equipments There are high restrict engineering requirements of manufacturing particularly in process of plating laminating and drilling Storm Circuit are very experienced in 6 layers PCB fabrication during...

    Contact Now

  • 4 layer  1.0mm with Green solder PCB

    4 layer 1.0mm with Green solder PCB

    • Model No.: Storm-0435

    • Transportation: Ocean,Land,Air

    In the 4 layer board the distance between the source line and the return path is still too large and it is still impossible to design the flux cancellation of the RF current generated by the circuit and the line A ground wire next to the power layer can be placed on the signal layer to provide a return path for the RF...

    Contact Now

  • 2 layer 1.6mm with Green Solder PCB

    2 layer 1.6mm with Green Solder PCB

    • Model No.: Storm-0433

    • Transportation: Ocean,Land,Air

    Most electronic designs that are not limited by any space constraint typically uses 2 layer board The cost of producing a 2 layer PCB board cost less than a multi layer board If each board cost a dollar less to produce it means that the more circuit boards you produce the more you will save by using a 2 layer board...

    Contact Now

  • 4 layer 1.0mm Green solder PCB

    4 layer 1.0mm Green solder PCB

    • Model No.: Storm-0420

    • Transportation: Ocean,Land,Air

    4 layer PCB means there are 4 layers to rout electrical signals Top Layer Inner Layer 1 Inner Layer 2 and Bottom Layer TOP and bottom layers are the outer layers where we are placing components and routing Inner layer 1 and inner layer 2 are in the core and normally used as power planes or used for signal routing...

    Contact Now

  • 2 layer Green solder PCB

    2 layer Green solder PCB

    • Model No.: Storm-0416

    • Transportation: Ocean,Land,Air

    Some customers asked us how quickly we can do for PCB and PCB Assembly Here you will get the right answer You can get 1 2 layer PCBs in 24 hours and 4 6 layer 2 3 working days 8 layer 3 4 working days All quick turn boards are also with top quality We even did 16 layer PCB within 12 days PCB features 1 Layer 2 2...

    Contact Now

  • 2 layer PCB Green solder

    2 layer PCB Green solder

    • Model No.: Storm-0410

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 2 2 Material FR4 3 Thickness 0 8mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 2mm 0 2mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 10 layer peelable solder mask PCB

    10 layer peelable solder mask PCB

    • Model No.: Storm-0400

    • Transportation: Ocean,Land,Air

    we are specialized manufacturers from China Peel Mask Board Green Peel Mask Board suppliers factory wholesale high quality products of Quick Turn Peel Mask Board R D and manufacturing we have the perfect after sales service and technical support Look forward to your cooperation PCB features 1 Layer 2 2 Material FR4 3...

    Contact Now

  • 8 layer peelable solder mask PCB

    8 layer peelable solder mask PCB

    • Model No.: Storm-0399

    • Transportation: Ocean,Land,Air

    Peel able masks are used in order to protect selected solder holes against plugging during mass soldering or to protect carbon elements and gold plated contacts during mass soldering Peel able masks are screen printed Peel able masks are used in order to protect selected solder holes against plugging during mass...

    Contact Now

  • 6 layer peelable solder mask PCB

    6 layer peelable solder mask PCB

    • Model No.: Storm-0398

    • Transportation: Ocean,Land,Air

    Peelable solder mask can withstand high temperatures As a protective film for pads peelable solder mask can withstand high wave soldering temperatures around 270 C The temperature of the circuit board during baking does not generally exceed 150 C so the properties and shape of the blue glue will not change after...

    Contact Now

  • 4  Peelable Solder Mask layer PCB

    4 Peelable Solder Mask layer PCB

    • Model No.: Storm-0397

    • Transportation: Ocean,Land,Air

    For a printed circuit board PCB printing process at least through the main processes of printing copper foil lines printing solder mask green oil printing logo characters and drilling or stamping 15 When the position deviation of one of the processes is greater than 0 15 the entire circuit board will be rejected PCB...

    Contact Now

  • 2 layer Peelable solder mask PCB

    2 layer Peelable solder mask PCB

    • Model No.: Storm-0396

    • Transportation: Ocean,Land,Air

    In the prior art after printing testing and final inspection peelable solder mask of the finished screen printing products in the PCB industry uses set screen printing The size of the unit plate is generally 13cm 30cm and the screen size is 85cm 105cm A single set of secondary screen printing results in low production...

    Contact Now

  • Peelable solder mask thickness

    Peelable solder mask thickness

    • Model No.: Storm-0395

    • Transportation: Ocean,Land,Air

    Peelable solder mask is a blue sticky silk like ink that uses screen printing Its main advantage is that it can be easily peeled off by hand or tool after printing without residue on the substrate At present in the manufacturing process of PCB boards Peelable solder mask is roughly divided into two types finished blue...

    Contact Now

  • 6 layer FR4 and RO4350B RF PCB

    6 layer FR4 and RO4350B RF PCB

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0387

    • Transportation: Ocean,Land,Air

    The materials used for PCB assembly military equipment are Rogers 4003c Rogers 4350 and RT5880 This SMT based two tier component contains 250 deployments The final product is tested on automatic X ray and optical equipment The quality assurance department thoroughly inspected each product These products were delivered...

    Contact Now

  • 4 layer blind and buried holes PCB

    4 layer blind and buried holes PCB

    • Model No.: Storm-0379

    • Transportation: Ocean,Land,Air

    In terms of technological processes these via in pad holes are generally divided into three types namely blind vias buried vias and through vias The blind holes are located on the top and bottom surfaces of the printed circuit board and have a certain depth They are used to connect the surface layer circuit and the...

    Contact Now

  • PCB hard gold and ENEPIG PCB

    PCB hard gold and ENEPIG PCB

    • Model No.: Storm-0375

    • Transportation: Ocean,Land,Air

    ENEPIG thick palladium thin gold has good solderability full tin and IMC is uniform and continuous ENEPIG thick palladium thin gold has good solderability full tin and IMC is even and continuous PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width space 0 1mm 0 1mm 8...

    Contact Now

  • ENEPIG PCB and Rogers material

    ENEPIG PCB and Rogers material

    • Model No.: Storm-0365

    • Transportation: Ocean,Land,Air

    Chemical nickel palladium ENEPIG is one of the common surface treatment processes for PCBs but in recent years the ENEPIG process has been applied to gold fingers in wire bonding optical module product We make many 4 layer ENEPIG PCBs with competitive price PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 2mm 4...

    Contact Now

  • 8 layer flex  and rigid-flex pcb

    8 layer flex and rigid-flex pcb

    • Model No.: Storm-0313

    • Transportation: Air

    For the Rigid flex PCB design The flex pcb area wiring should go straight in and out as far as possible If the structure is limited to the flex and rigid joints use arc transitions as much as possible and make arcs at the corners of the flex area PCB features 1 Layer 4 layer rigid 4 layer flex 2 Material FR4 Polyimide...

    Contact Now

  • IPC standard for ENEPIG

    IPC standard for ENEPIG

    • Model No.: Storm-0370

    • Transportation: Ocean,Land,Air

    Use the plug connector to plug and unplug the thick palladium thin gold and electroplated hard gold fingers and manually insert and remove 500 times Observe the appearance of golden fingers with a stereo microscope After the plug test there is a silver gray trace on the gold surface of the thick palladium thin gold...

    Contact Now

  • 2 layer ENEPIG PCB with green  solder

    2 layer ENEPIG PCB with green solder

    • Model No.: Storm-0368

    • Transportation: Ocean,Land,Air

    Thick palladium and thin gold The thickness of the coatings of ENEPIG gold fingers and electrical hard gold fingers are measured by the X ray coating thickness gauge as shown in Table 1 Au 0 061 m Pd 0 347 m hard gold process Au 0 388 m PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0...

    Contact Now

  • blind and buried via technology

    blind and buried via technology

    • Model No.: Storm-0344

    • Transportation: Ocean,Land,Air

    HDI PCB can reduce PCB cost When the density of the PCB increases by more than 8 layers it is manufactured by HDI and its cost will be lower than the traditional complicated lamination process Increased circuit density interconnection of traditional circuit boards and parts HDI PCB facilitates the use of advanced...

    Contact Now

  • cost of blind and buried vias

    cost of blind and buried vias

    • Model No.: Storm-0345

    • Transportation: Ocean,Land,Air

    Holes with a diameter of less than 150um are called microvias in the industry PCB made using this microhole geometry technology can improve the benefits of PCB assembly space utilization and so on At the same time there are also miniaturization of electronics Its necessity PCB features 1 Layer 8 2 Material FR4 TG170 3...

    Contact Now

  • what is blind and buried vias

    what is blind and buried vias

    • Model No.: Storm-0347

    • Transportation: Ocean,Land,Air

    HDI PCB boards are high density interconnected PCB circuit boards The boards with blind hole plating and secondary lamination are all HDI boards They are divided into first second third fourth and fifth order HDI PCB 1 Layer 8 layer 2 Material FR4 Tg170 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 15mm 7 Mini width...

    Contact Now

Review

Sophia Zhang

Jul 28, 2020 5

Storm Circuit Technology Ltd is a very good company. Very professional.
Mark Ramsey

Jul 24, 2020 5

Great, I'm very satisfied with the quality of this Green Peel Before And After . My product has been in production for half a month. My products are also very popular with customers, I really appreciate Storm Circuit Technology Ltd .
Bertrand Yao

Jul 19, 2020 5

I am really happy that I got this Green Peel Before And After with a nice deal price as well.
  • Related Information
That has a positive and progressive attitude to customer's interest, our organization consistently improves our products quality to satisfy the demands of shoppers and further focuses on safety, reliability, environmental specifications, and innovation of Green Peel Before And After , green peel before and after , green herbal peel before and after , Keen cooperation and Development" are our objectives. We have been here anticipating good friends all over the environment!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home

Phone

Skype

Inquiry