Communicate with Supplier? Supplier
Dartin Xin Mr. Dartin Xin
What can I do for you?
Chat Now Contact Supplier
Storm Circuit Technology Ltd

How To See Layers In Eagle - manufacturer, factory, supplier from China

(Total 24 Products for How To See Layers In Eagle)

  • Single layer PCB with small dimension

    Single layer PCB with small dimension

    • Model No.: Storm-0458

    • Transportation: Ocean,Land,Air

    Single layer PCB is on the most basic PCB where parts are concentrated on one side and wires are concentrated on the other side Because the wire only appears on one side we call this kind of PCB a single side Because there are many strict restrictions on the design circuit of single layer PCB because there is only one...

    Contact Now

  • 2 layer  prototype PCB board

    2 layer prototype PCB board

    • Model No.: Storm-0457

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 3mm 7 Mini width space 0 25mm 0 25mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 4 layer via in pad PCB board

    4 layer via in pad PCB board

    • Model No.: Storm-0456

    • Transportation: Ocean,Land,Air

    Via in pad in the disk is mainly used in the packaging area of BGA because when the surface needs to be welded or chip pasted the requirements for its accuracy and acceptable area are high and the requirements for the surface flatness are high so as to prevent the chip from being uneven when it is pasted resulting in...

    Contact Now

  • 4 layer Blind and burried via  PCBs

    4 layer Blind and burried via PCBs

    • Model No.: Storm-0001

    HDI PCB uses advanced laminate materials that are thinner than those used in traditional printed circuit boards Since HDI PCB requires higher accuracy and manufacturing accuracy and overall performance special materials that meet specific specifications are required Storm Circuit offers multiple material options for a...

    Contact Now

  • 2 layer PCB with 2 days to finish

    2 layer PCB with 2 days to finish

    • Model No.: Storm-0444

    • Transportation: Ocean,Land,Air

    PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper 1OZ 5 Mini hole 0 3mm 7 Mini width space 0 25mm 0 25mm 8 Finish Immersion Gold Our manufacturing capability Manufacture capability layers 1 32 layers Materials CEM1 CEM3 Rogers FR 4 high TG FR 4 aluminum base halogen free Max board Size 510 1200mm...

    Contact Now

  • 2 layer Industrial test PCB board

    2 layer Industrial test PCB board

    • Model No.: Storm-0414

    • Transportation: Ocean,Land,Air

    The ultra thick copper circuit board refers to a circuit board with an inner conductive circuit layer thickness greater than or equal to 100 m The ultra thick copper circuit board has the advantages of being able to pass large currents and having good heat dissipation performance so as to better meet the needs of high...

    Contact Now

  • Quick turn 8 layer PCB  factory

    Quick turn 8 layer PCB factory

    • Model No.: Storm-0130

    • Transportation: Ocean,Land,Air

    Our products include 1 30 layers PCB fabrication 1 6 layers FPC manufacturing 2 10 layers rigid flex board manufacturing components procurement membrane switch stencil and cables which used in Telecommunication Industrial control Power supply Consumer Electronics lighting equipments home appliances Auto and medicine...

    Contact Now

  • 4 layer PCB prototype board factory

    4 layer PCB prototype board factory

    • Model No.: Storm-0270

    • Transportation: Ocean,Land,Air

    Storm circuit technology Ltd is a professional PCB printed circuit board service provider specializing in R D of high density multilayer boards special boards and PCB prototypes and small volume PCB circuit boards Storm circuit technology Ltd s products include 2 28 layer boards high TG boards thick copper boards...

    Contact Now

  • 4 layer PCB with via in pad

    4 layer PCB with via in pad

    • Model No.: Storn-0278

    • Transportation: Ocean,Land,Air

    The four layer board is laminated on the basis of the double sided board two layer board During the pressing PP and copper foil are added to the two sides of the double sided board and then pressed into a multilayer board after high temperature and high pressure In simple terms the four layer board has an inner layer...

    Contact Now

  • 4 layer RO4350B 0.8mm RF PCB factory

    4 layer RO4350B 0.8mm RF PCB factory

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0385

    • Transportation: Ocean,Land,Air

    RF and other parameters When selecting the perfect material for PCB materials microwave energy level operating frequency operating temperature range current and voltage requirements are very important When you start manufacturing a PCB make sure you have selected the specifications that fit your PCB Traditional high...

    Contact Now

  • Edge plating ENEPIG pcb process

    Edge plating ENEPIG pcb process

    • Model No.: Storm-0373

    • Transportation: Ocean,Land,Air

    A 48 hour salt spray test was performed on the gold finger after 500 times of plug test to evaluate the corrosion resistance of the gold finger of the two processes Test conditions salt solution composition 50g L NaCl solution test temperature 35 pressure barrel temperature 47 pH value 6 5 7 2 25 placement angle the...

    Contact Now

  • 4 layer blind and buried holes PCB

    4 layer blind and buried holes PCB

    • Model No.: Storm-0379

    • Transportation: Ocean,Land,Air

    In terms of technological processes these via in pad holes are generally divided into three types namely blind vias buried vias and through vias The blind holes are located on the top and bottom surfaces of the printed circuit board and have a certain depth They are used to connect the surface layer circuit and the...

    Contact Now

  • 4 layer BGA  via in pad PCB

    4 layer BGA via in pad PCB

    • Model No.: Storm-0380

    • Transportation: Ocean,Land,Air

    Via in pad is an important component of the multilayer PCB It not only bears the performance of the main functions of the PCB but also the cost of drilling usually accounts for 30 to 40 of the cost of the PCB In short every hole on a PCB can be called via in pad PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 6mm...

    Contact Now

  • 4 layer ELIC  via in pad PCB

    4 layer ELIC via in pad PCB

    • Model No.: Storm-0381

    • Transportation: Ocean,Land,Air

    Via in big pads are not a big problem but for BGA that is technology As BGA pads are very small 10mil or 12mil and there is no enough space Manufacturing is not easy as other boards PCB features 1 Layer 4 2 Material FR4 3 Thickness 1 0mm 4 Copper 1OZ 5 Mini hole 0 1mm 7 Mini width space 0 08mm 0 08mm 8 Finish...

    Contact Now

  • 8 layer HDI via in pad PCB

    8 layer HDI via in pad PCB

    • Model No.: Storm-0378

    • Transportation: Ocean,Land,Air

    How PCB manufacturers like us to do via in pad board We will fill all vias with non conductive epoxy and plate copper over it so the vias are flat same as others Many PCB factories are unable to do such capability The key technology is how we fill vias and guarantee there is no any solder surface finishing in the...

    Contact Now

  • 8 layer via in pad PCB

    8 layer via in pad PCB

    • Model No.: Storm-0377

    • Transportation: Ocean,Land,Air

    What is Via in Pad In shortly via in pad is the via holes are at the SMD pad The vias are very small usually under 0 3mm Why and how First is there is no enough space to layout you have to put the vias and holes closer even together Second it helps thermal management and for high frequency boards it may help improve...

    Contact Now

  • ENEPIG pcb surface finish for wire bonding

    ENEPIG pcb surface finish for wire bonding

    • Model No.: Storm-0376

    • Transportation: Ocean,Land,Air

    ENEPIG gold finger has good resistance to plugging corrosion and aging and its performance is similar to that of electroplated hard gold ENEPIG gold finger has good resistance to plugging corrosion and aging Similar in hard gold PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 2mm 4 Copper 1OZ 5 Mini hole 0 15mm 7...

    Contact Now

  • ENEPIG solder joint reliability

    ENEPIG solder joint reliability

    • Model No.: Storm-0374

    • Transportation: Ocean,Land,Air

    When NEPIG gold finger technology is applied to bonding products the production process is simple the gold finger is four bread gold and the bonding pad spacing is strong the cost is lower than the traditional electroplated hard gold finger technology PCB features 1 Layer 2 2 Material FR4 3 Thickness 1 6mm 4 Copper...

    Contact Now

  • electroless copper ENEPIG  plating pcb

    electroless copper ENEPIG plating pcb

    • Model No.: Storm-0372

    • Transportation: Ocean,Land,Air

    After the plug test there is a light silver gray trace on the gold surface of the electroplated hard gold finger The elemental analysis results are Au Ni where the atomic percentage of Au is 94 99 The gray scratched surface is Au The contact resistances before and after the plug in test are 6 26 and 5 59 m and the...

    Contact Now

  • metal core pcb factory

    metal core pcb factory

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0355

    • Transportation: Ocean,Land,Air

    Working principle of aluminumCore PCB The surface of the power device is mounted on the PCB circuit layer The heat generated during the operation of the device is quickly conducted to the metal core layer through the insulation layer and then the heat is transferred by the metal core layer to achieve the heat...

    Contact Now

  • Wire bonding PCB need ENgineering finishing

    Wire bonding PCB need ENgineering finishing

    • Model No.: Storm-0369

    • Transportation: Ocean,Land,Air

    Taking into account the plug in resistance of nickel palladium and palladium and the requirements of high speed optical module products the SFF 8436 Specification for QSFP 10 Gbs 4X PLUGGABLE TRANSCEIVER standard formulated by the SFF Committee 2 specifies nickel palladium Surface treatment as a requirement for gold...

    Contact Now

  • ENEPIG finishing plating  thickness

    ENEPIG finishing plating thickness

    • Model No.: Storm-0371

    • Transportation: Ocean,Land,Air

    Metal palladium is a platinum based element with stable chemical properties and acid and oxidation resistance At the same time the hardness of metal palladium is greater than that of hard gold PCB including cobalt and it has better resistance to plugging and unplugging The chemical nickel palladium gold process...

    Contact Now

  • metal core pcb prototyping sheet

    metal core pcb prototyping sheet

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0357

    • Transportation: Ocean,Land,Air

    Aluminum core MCPCB printed board with shielding effect replaces brittle ceramic substrate rest assured that surface mounting technology is used reduces the real effective area of printed circuit board replaces components such as radiators improves product heat resistance and physical properties reduces production...

    Contact Now

  • metal core pcb prototyping

    metal core pcb prototyping

    • Min. Order: 1 Bag/Bags

    • Model No.: Storm-0353

    • Transportation: Ocean,Land,Air

    Storm circuit is positioned in the professional manufacture of high performance and high thermal conduction LED MCPCB copper substrates thermo electric separation copper aluminum composite plates and other metal plates Difficulties committed to providing customers with high quality PCB aluminum substrate copper...

    Contact Now

Review

Mr.anurag Rungta

May 28, 2020 4

The How To See Layers In Eagle price’s favourable.Recommend.
Omer Mustafa

May 13, 2020 5

You have make a excellent package for this stuff.I will come and buy again if the How To See Layers In Eagle test well.
Chetan Patel

May 13, 2020 5

The How To See Layers In Eagle Came with excellent package.Product is suitable for us.
  • Related Information
Fast and great quotations, informed advisers to help you choose the correct product that suits all your preferences, a short manufacturing time, responsible excellent handle and distinctive services for paying and shipping affairs for How To See Layers In Eagle , how to see layers in eagle , How to Create Gerber Files in Eagle , We believe that our warm and qualified assistance will bring you pleasant surprises as very well as fortune.
"Our products are widely regarded and trustworthy by customers and might meet constantly changing financial and social demands for How To See Layers In Eagle , how to see layers in eagle , How to Create Gerber Files in Eagle , We are adhering to the philosophy of "attracting customers with the best products and excellent service". We welcome customers business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Home

Phone

Skype

Inquiry